NEW Dan Kubin MCi (Mini Cranker with Impact)!

Step up your tattoo game with the new DK MCi – a plug-and-play remastered version of Dan's Mini Cranker from 2011. Updated and refined, it's designed for precision and ease of use, whether you're using a needle on bar or cartridges. With its wide range of versatility and solid hit, it's a must-have for any tattoo artist.

Specs:

• Steel Frame with HD Black Finish

• Weighted Brass Armature

• Deluxe Kubin Components including DK Thumbs and updated Slide Vise

Setup / Usage:

• Works well with Standard Needle on Bar AND with Cartridges

• Possible to run with Cartridges without any adjustment or tricks, but if you pull your rubber band over the armature it will increase the snap at the tip

• This machine is cartridge friendly, but best to use lower tension cartridges if going that route. (Workhorse Eco Carts and Non Membrane Carts work well with these machines)

• Great for Lining and Shading with small to medium groupings, turn voltage up and down for speed and hit adjustment as needed

• Higher voltage between 5 - 7 Volts for most Lining

• Lower Voltage between 3.5 - 5 Volts for most Shading, Color Packing, and Stipple Work

• Polarity is not crucial, but will run slightly more efficiently with Positive Down

• The impact screw can be backed off all the way, but ideal to still have a little impact to reduce motor shaft strain

• Turning the impact screw in too much will result in stalling the machine or putting too much strain on the motor.  

• Ideal impact is about 1/4-1/2 turn clockwise from the point of zero impact. 

*** PLEASE NOTE: TATTOO MACHINES & SUPPLIES ARE ONLY AVAILABLE TO PROFESSIONAL TATTOO ARTISTS.

****DAN KUBIN & WORKHORSE IRONS PRODUCTS CAN ONLY BE SOLD WITHIN AUSTRALIA AND NEW ZEALAND

Free Express Post on all machines within Australia

Enter Code “NEWMACHINE”